Full replacement of a worn roof covering, with the deck and underlayment checked first.
Fastest: call (833) 751-2102. Or send this and we call you back.
Roof replacement in Fontana means removing the existing covering, checking the roof boards and underlayment, and installing a new roof system. It is usually the answer when repairs no longer hold across several slopes. Fontana Roofing connects homeowners in Fontana and San Bernardino County with a local crew that explains the scope before any work starts.
A roof replacement is a larger decision than a repair. It means the existing covering has reached the point where patching separate areas no longer keeps the water out, and the whole roof needs a new surface. In Fontana the roof spends most of the year under strong sun, and the coverings that take that load often reach the end of their useful life sooner than a homeowner expects.
This page explains how a replacement is scoped, what a crew checks before the old roof comes off, and what moves the scope up or down. It describes the work step by step so that a homeowner can compare quotes on the same basis. No price is printed, because the scope depends on the roof, and the price is explained and approved before any work begins.
A roof replacement is heavy, fast-moving work, and a homeowner should not start tearing off any part of the covering or lifting old material on their own. Keep children and pets away from the drop zone and the ladder line. Do not walk the new underlayment before it is secured. (833) 751-2102 connects you with a local crew that sets its own safety plan for the job.
The old covering is removed completely and the roof is rebuilt on a sound deck. This is the usual choice when the existing layers are brittle, when more than one layer sits on the deck, or when the boards need work. It gives the crew the clearest view of the decking and the flashing.
In some cases a new covering can be laid over a single existing layer, where the deck is sound and the local rules allow it. The crew checks the structure first, and a homeowner should ask the crew whether an overlay is suitable for this roof and why.
When one slope has failed and the others are sound, the crew can replace the failed slope and blend the new work into the existing roof. The match in color and profile is the main limit, and the technician shows you the blend before the work is finished.
A replacement is a good time to review the attic vents and the ridge ventilation, which help the attic shed heat under a hot roof. Adding or resizing vents is part of the same scope, and the crew explains what each change does.
If it's an emergency, call now. For non-urgent roof replacement, send the form and we'll call you back.
The scope of a replacement drives the quote: the roof area, the pitch, the number of layers to remove, the condition of the deck, the flashing and the access. No figure is printed here, and the price is confirmed on site before work begins.
A large, steep or complicated roof takes more time and more safety equipment than a simple gable, and the quote reflects that. Each valley, dormer, skylight and chimney adds flashing work that has to be done carefully, so a roof with many of these features costs more to replace than one with few.
Layers matter as well. Removing two old layers takes longer and produces more debris than removing one, and the crew must check the deck under them. A roof with rotten boards adds a line for the boards that is only known once the old covering is off.
The time a replacement takes depends on the roof size, the number of layers, the weather and the work that the attic check finds. The crew gives you its planned sequence and tells you what could change the plan, rather than promising a finish date.
Weather is a real factor. Strong wind stops the crew from setting new material safely, and very hot afternoons make some coverings harder to handle. The crew plans around the forecast and says when a stop is needed.
Because the deck is only fully seen once the old covering is off, a replacement can grow when a board needs more work than was visible. The crew reports any change in scope in writing before it carries on.
A roof replacement can need a permit, depending on the work and the local rules. The crew checks what is required for the job and tells you before work starts. This page does not state the permit rules for the city.
A permit question is part of the scope, not an afterthought. Whether a permit is needed, and what inspection follows, depends on the type of work and the rules in force for the property. The crew should name the permit question at the quote stage.
The company that does the work keeps the responsibility for the permit and the license that the job calls for. Ask the crew to confirm that the paperwork is in hand before any old covering comes off.
The right covering depends on the roof pitch, the structure, the budget and the look the homeowner wants. Shingle, tile and metal coverings are all common choices for replacement, and the crew explains how each one handles heat and wind before a choice is made.
Heat and sun affect every covering, but they do so in different ways. A covering that cracks when it dries out needs regular checks of its edges, while one that resists heat well still depends on the flashing and the seals to keep water out.
A crew should explain the trade-offs without pushing one product. Ask what each option needs in maintenance, what the crew has fitted before, and how the covering handles the wind that reaches the edges of the roof.
Before any tear-off, check the scope in writing, the permit position, the crew's license and workers' compensation proof, the plan for the attic ventilation and what happens if a board needs replacing. Those points stop most later disputes before they start.
Ask the crew how it protects the property during the work. Plants, cars, the driveway and the gutters should be covered or cleared, and the crew should say where debris will be dropped and how it is taken away.
Ask who will be on the roof and whether they are employees or a sub-trade. The homeowner needs to know which company is responsible if something goes wrong during the work, and that answer should be given in writing.
The crew walks the whole roof and tests the covering at several points. They record which slopes are worst, how the flashing is holding and whether the layers have lost their flexibility. The survey comes before any quote, because it sets the scope.
The attic is checked from below for stains, soft boards and signs of past water. A replacement that covers rotten boards only traps the damage underneath, so the technician notes every board that needs replacing and the reason for it.
The crew sets out what will be removed, what will be replaced, which flashing is renewed and how the ventilation is handled. The price is explained line by line and approved by the homeowner before any material is ordered or any old covering comes off.
The old covering is stripped to the deck. Damaged boards are cut out and replaced at this stage, and the surface is cleaned so that the underlayment can bond to a sound base. The work is done with care around the roof edge and the gutters.
The underlayment goes on first, then the new covering, with the flashing and the ridge detail finished last. The crew checks the finished roof for any gap or any edge that could let wind lift the new material.
A crew sets the scope from what it finds on each roof rather than from a general rule for the city. The sun and the dry seasons put steady stress on a covering, and a rare heavy rain then finds the cracks that the sun has opened.
The Inland Empire climate puts steady stress on a covering. Long dry periods and strong sun dry out the surface, and a rare heavy rain then finds the cracks. A replacement is designed so that the deck, the underlayment and the flashing carry that load together, not only the covering on top.
The former Kaiser Steel mill site, built just outside the city limits during World War II, is now the Auto Club Speedway. Replacement quotes here are written for the roof in front of the crew, and the crew explains what it finds.
Not sure if you're covered? Check your ZIP code.
Repair of a leaking, cracked or lifted roof section, done before water reaches the roof boards.
Replacing an asphalt shingle roof, with the layers, deck and ventilation checked before the new shingles go on.
A dated, photographed written report of a roof and attic, useful before and after a season or a sale.
A planned yearly check of the roof and attic, timed to the rain season, the summer heat and the wind.
A roof replacement quote in Fontana depends on the roof area, the pitch, the covering, the number of layers to remove, the condition of the deck and the access.
Before signing a roof contract in Fontana, ask for the contractor license number and the C-39 roofing classification, check the number with the Contractors State License Board and ask for a current workers' compensation certificate.
Sun and heat act on every roof covering, but each covering responds in its own way.
A roof that leaks in more than one place, that has cracked covering across several slopes, or that has soft boards in the attic is usually ready for replacement. A single failed area is more often a repair. A crew can judge which one applies after a full survey of the roof and the attic.
Yes. The boards are checked from above and below, and soft or stained boards are cut out and replaced before the underlayment goes down. The crew notes every board that is changed and explains the reason, so the homeowner knows what was done.
Yes, most homeowners stay in the house. The attic and the rooms under the work may be noisy and dusty for a time, and the crew should explain the protection it puts in place. Ask what the crew does about the ceiling and the light fixtures in the rooms below.
Ask for the scope, the number of layers to remove, the deck repair allowance and what it covers, the flashing that will be renewed, the ventilation plan and the cleanup. Ask who holds the permit and the license, and how a change in scope will be priced and approved.
A replacement can change the way the insurer views the roof, and the written scope and photographs can be useful for your records. Whether a policy responds to any loss is for the insurer and your policy to decide. For a dispute about a claim, the California Department of Insurance is the route to use.
Ask for the contractor license number and the C-39 roofing classification, and look the number up with the Contractors State License Board. Ask to see a current workers' compensation certificate for the company that attends. A crew that will not give these details should not be given the job.